德國進口PTL F39.41彎曲試驗旋轉機

PTL Flexing Test Swivel Machines





for cont inuous bending tests by swivelling movements to check cables or cords fitted with plugs or entries from electric tools and from hand lamps
according toIEC 60884-1:2006-07 § 23.4 Fig. 21，
and for continuous bending tests on flexible cords or cables
according toIEC 60227-22003-04 § 3.2 Fig. 2.
Flexing Test Swivel Machine 41 for mechanical tests of 1 or 2 samples， swivel angle changeable to ±22.5°， ±45° and ±90°， swivel frequency adjustable from 0.3 Hz to 1 Hz.
Standard outfit:
1rigid Housing， made as weldment of steel profiles and rectangular steel tubes with metal sheet covering， and protective window with safety switch inside to cover the
swivel angle adjustment and the connecting rod，

1Chassis to accommodate the control unit， with front panel， with the components: Main switch with EMERGENCY STOP function， pilot lamp for mains voltage on， fuses for the control unit and for the drive motor， frequency indicating instrument and rotary knob， predetermining counter， 6 digits， start and stop push-buttons and switch "Inching" for setting the swivel head，
1Drive unit for the swivelling movement with geared motor， gearwheel with slip friction clutch， reduction gearwheel， crank disk with set bores to set the swivel angles， connecting rod with 2 bearing heads， transmission shaft and hollow output shaft with welded flange to fix the swivel head or other adapters，
1Slide unit， with spindle for fine adjustment of the height and with 2 clamp bars for coarse height adjustment， can be mounted at a turn of 90°， too，
1Swivel head， mounted on the support of the slide unit， with swivel main plate， with 2 bushings， for carrying the adapters F 39.7X and with 2 fitting plates for right angle plugs，with arresting pins for arresting the bushings at two positions， which are turned by 90°，
1Guidance for the samples， metal plate with elongated holes as guides， with 4 distance rods for distance of 250 mm underneath the swivelling axis， convertible to 300 mm， and 2 frames，
2sets of Loading weights， for sample loads from 5 N to 60 N， that means from approx. 0.5 kg to approx. 6.0 kg， with each 1 weight carrier 5 N with clamping kit， 1 weight piece 5 N， 1 weight piece 10 N and 2 weight pieces 20 N， weights can be easily added or removed by means of threads.
Design:
Floor type housing， of sheet steel， papyrus-white structure varnished， swivel head mainly of anodized aluminium， weights and parts of the swivelling gear black-oxide-finished， small parts black-oxide-finished or of stainless steel， for connection to A.C. 230 V 50 Hz，
Flexing Test Swivel Machine 41Article No.:F 39.41