HG-2660耐水試驗機(耐淋雨試驗機) 產品說明： 本機適用于汽機車燈具、雨刷性能、防水倐帶、機車儀表、國防工業之導航系統、飛彈之導火管、鼻錐狀體、雷達錐頂及航空工業之耐雨水試驗。 特點： 1：可調式水壓流量設計，一般約為10cm/h 之落雨量，最大可符合未來二十年之最大降雨量35mm/m。 2：獨一無二的配水器能使雨量輿壓力穩定控制。 3：R ，S 分開控制，無需操作者進入槽內更替。本機B型可使受測物加溫從RT～85℃，使受測物溫度比水溫高而產生一負壓力，使測試更精確 This device may be used to test the lights of automobile and autobikes,the function of rain sweeper, weather strip,the panel of autobikes, the guiding devlce of the missiles in national defense system,and the cone shaped cap of radar.It may also be used to test the rainproot function of the equipment used in aviation industry. Features： 1：The water flow gage is adjustable It is generally suitable of 10cm/h and it can meet the requirements of maximum rainfall of 35mm/m that may happen in the forthcoming 20 years. 2：The unique water dispenser may steadily contrlo the flow of rainfall and the pressure. 3：R,S may be separately controlled and therefore,it may be replaced without the necessity of havintg the operator enter the tank to do the work.B type of this machine may heat the item for test from RT～85℃Celsius degrees,thus a negative pressure may be generated because of the fact that the temperature of the item being tested is higher than that of the water,This will make the more precise(MIL.STD) INSIDE DIMENSION ：1000 × 1000 × 1000(W×D×H)mm OUTSIDE DIMENSION：1450 × 1300 × 2000(W×D×H)mm Related Standards ： JIS ： D0203,D5500 SAE ： J575e CNS ： 7138