奧地利伯樂(lè)ER90S-B3焊絲

B?HLER CM 2-IG TIG rod
Classifications low-alloyed
EN ISO 21952-A: AWS A5.28:
W CrMo2Si ER90S-B3 (mod.)
Characteristics and field of use
TIG welding rod， copper coated for welding in boiler， pressure vessel and pipeline construction， and
for the petrochemical industry， . cracking plants. Preferred for 10CrMo9-10， and also suitable
for similar-alloy quenched and tempered and case-hardening steels. Approved for long-term use at
operating temperatures of up to +600°C. The weld metal exhibits high quality， good toughness and
crack resistance， as well as a creep strength very much in the same range as 10CrMo9-10. Very
good welding and flow behaviour.
Marks (rods0nly)
front: W CrMo2 Si
back: 1.7384
Base materials
same type as creep-resistant steels and cast steels， similar alloy quenched and tempered
steels up to 980 MPa strength， similar alloy case-hardening and nitriding steels 1.7380 10CrMo9-
10， 1.7276 10CrMo11， 1.7281 16CrMo9-3， 1.7383 11CrMo9-10， 1.7379 G17CrMo9-10， 1.7382
G19CrMo9-10 ASTM A 182 Gr. F22 A 213 Gr. T22 A 234 Gr. WP22 335 Gr. P22 A 336 Gr. F22
A 426 Gr. CP22
Typical composition of welding rod (Wt-%)
C Si Mn Cr Mo P As Sb Sn
0.08 0.6 0.9 2.5 1.0 ≤0.010 ≤0.010 ≤0.005 ≤0.006
Mechanical properties of all-weld metal
Heat Treatment Yield strength
0.2% Tensile strength Elongation
(L0=5d0)
Impact values
in J CVN
MPa MPa % +20°C:
annealed * 470 600 23 190
(*) annealed， 720°C/2 h/furnace down to 300°C/air – shielding gas Argon
Operating data
Polarity = - Shielding gas:
100% Argon
Dimensions (mm)
1.6 2.0 2.4 3.0
Approvals and certificates
TüV (1564.)， SEPROZ， CE， NAKS (?2.4 mm ?3.0 mm)
Similar alloy filler metals
GMAW solid wire: CM 2-IG Flux cored wire: CM 2 Ti-FD
SMAW electrode: FOX CM 2 Kb SC
FOX CM 2 Kb SAW combination:
CM 2-UP/BB 24
CM 2 SC-UP/BB 24 SCEMS 2
CM 2-UP/BB 418 TT